Shop By Brand

Sort By:
Smart Battery Charger - 6V/12V - 2 Amp
Smart Battery Charger - 6V/12V - 2 Amp - Designed for 6-volt and 12-volt lead-acid automotive, marine, and deep-cycle batteries.
- Alters the charge to eliminate over-charging in hot climates and under-charging in cold climates.
- Charges dead batteries as low as 0-volts in the new 'Force Mode'.
- Automatically repairs and reverses battery damage caused by sulfation and acid stratification to restore performance and extend battery life.
- Compatible with all types of vehicles.
- An ultra-compact and high-efficiency design with maximum power density and detailed dynamic battery tracking.
- Charge safely 24/7 without any risk of overcharging your batteries, plus additional safety like spark-proof connections, and reverse polarity protection.
- Provides all-season and all-weather charging for a healthy battery.
- The M6 eyelet clamps have wide clamping range and improved clamping force for higher conductivity.
- 3-Year Limited Warranty
- Short-Circuit: Yes | Open-Circuit: Yes | Overheating: Yes | Overcharge: Yes | Spark-Proof: Yes | Reverse Polarity: Yes
Height: 3.7 Inches (94mm) | Width: 2.4 Inches (61mm) | Depth: 1.7 Inches (43mm) | Weight: 1.1 Pounds (0.5kg)
DC Cable Length: 77.6 Inches (197cm) | DC Cable Size: 18 AWG | DC Fuse Size: 4 AMP Micro Blade Fuse | AC Cable Length: 71.7 Inches (182cm) | AC Cable Size: 18 AWG | Oil, gas, grease, water, chemical, UV, abrasion resistant
- Operating requirements - Line Voltage: 120V to 240V AC
- Frequency: 50Hz to 60Hz
- Operating Temperature: -4° to 104° F (-20° to 40° C)
- Storage Temperature: -22° to 140° F (-30° to 60° C)
- Relative Humidity: 0 to 95% Non-Condensing
- IP Rating: IP65
- Consumption: 30 Watts (Max)
- Efficiency: 87% (120VAC/230VAC)
ONLY £47.99
Sort By: